Product Detail
Quick Mill Espresso Machine Parts and Accessories
Contact us to purchase any of these parts.
Quick Mill No Burn Steam Wand - OT0980LVC
This No Burn Steam Arm is a nice upgrade from the standard steam arms on a couple of espresso machines, including the Vivaldi II, Anita, and the Bezzera BZ07. As seen above in the picture (shown next to the stainless steel wand that comes on the LaSpaziale Vivaldi II and Mini Vivaldi II), the arm is longer, has a nice polish to it, and makes it easier to touch while steaming. It comes standard with a 2 hole steam tip.
Quick Mill No Burn Hot Water Wand – NBHWW
The No Burn Hot Water Wand can be used on the Andreja Premium, Anita, Alex II, and the Alex Duetto II.
4 Hole Steam Tip for No Burn Wand - QM4HNB
The No Burn Steam Arm has become more and more popular, now standard on several high end home espresso machines. The arm comes standard with a steam tip that has two rather large holes and is difficult to make good micro-foam with it. Thankfully, we found a manufacturer that would make us a 4 hole steam tip with 0.9 mm holes at the proper angle, giving you excellent micro-foam. This tip has a 8mm Male thread.
Digital Thermometer for E61 - SSS-04
The purpose of this adapter and digital thermometer is to facilitate the measurement of brew water temperature about 1.25" away from the puck during a real brew cycle. In addition, and equally important, it measures the temperature of the group-head under idle conditions. It requires no drilling, tapping, soldering, brazing, cutting, Teflon tape, or epoxy but can ONLY be installed in E61 group-heads that are fully exposed. The difference between the temperature that you will be measuring using this adapter and measured temperature of the water hitting the puck is approximately 3-5 °F but may vary with different machines and different brew conditions and most certainly, varies over the course of a typical 23-27 second shot. The new style thermometer has switches for both the on/off function and temperature scales (°F/°C).
Features
- Stainless steel adapter fitted with replaceable nylon ferrules and a modified digital themometer with rapid response °F or °C (user selectable)
- Two 6 mm copper sealing washers (one for installation, one as a spare)
- Adapter closure plug (should you want to temporarily suspend the temperature measuring adventure)
- One set of spare nylon ferrules (front and back) for adapter
Group Gasket - E61 8.5mm - F016
The standard gasket size for Alexia, Anita, Andreja Premium, Vetrano, Alex Duetto, and Alex II is the E61 8.5 mm.
Shower Screen - E61 - F277
Replacement group shower screen for machines with E61 groups, such as Isomac Relax, Giotto, Andreja Premium, La Cimbali, La Spaziale, Valentina, etc.
Joystick Valve Complete – Steam - JT995STM
Joystick Valve Complete - Hot Water - JT995H20
Multi-directional joystick steam and hot water assemblies for the Andreja Premium and the Vetrano espresso machines by Quick Mill. The assemblies are only able to easily fit on these two espresso machines, no adapter required. They will fit not only the new designed models but the original models as well. The joystick steam arm assembly comes with a standard two hole tip.
**NOTE**: These joystick assemblies can also be fitted on to the Alex II and the Alex Duetto machines (II and 3.0). However, an adapter is needed for each joystick assembly in order to operate. It is listed below.
Custom Made Knobs (Set of Steam & Hot Water) - QMKS
Barista steam and hot water knobs, set of 2. The knobs are only able to fit the Andreja Premium, Vetrano, QM67, Alex II, and the Duetto II and 3.0.
**NOTE**: These new knobs will only fit on the "New Style" knobs shown in the picture below. If your knobs matches the "Old Style" design, these knobs will not fit.
For older versions of the Andreja & Vetrano.
Monza Direct Connect Kit – MZDCKIT
The Monza Direct Connect Kit is for those who want to connect their Monza Deluxe Super Automatic to a water source instead of constantly refilling the water reservoir.
Must be ordered for direct plumbed machines
Monza Drain Kit - MZDRNKIT
The Monza Drain Kit is an optional accessory to the Monza Deluxe Super Automatic. It hooks up under the Monza platform base, which is required to be purchased as well. Now, you can save precious time instead of draining into the drip tray.
**NOTE**: The Monza Platform is necessary for the Monza Drain Kit to work.
Monza Platform - MZPLAT
The Monza Platform raises the Monza Deluxe Super Automatic to a height of 21". It is for those who wish to elevate the machine above the counter for easy cleaning and/or who wish to connect an optional drain.
**NOTE**: The Monza Platform is necessary for the Monza Drain Kit to work.
Monza Piston O-Ring - OR4137
A replacement piston o-ring for the Monza Super Automatic by Quick Mill.
| Manufacturer Name: |  |
Quick Mill
|
|---|---|---|
| Part number: | |
|
| Manufacturer's Warranty: | |
Parts: N/A Labour: N/A |
| Warrantor Link: | N/A |
| Manual: | |
N/A |
|---|---|---|
| Suggested Retail Price:Support Info: | N/A | |
| Warranty Policy: | |
N/A |